Need any help or advice?
+44 (0)1782 454499
Downloads (1)
 | Technical Datasheet (TDS) |  251 KB |
Specification
Product Data
| Colour | White | |
|---|---|---|
| Chemistry / Material | Polyester | |
| Format | Non Woven Fabric | |
| Type | Breather / Soaker |
Weight and Dimensions
| Width | 1520 | mm |
|---|---|---|
| Areal Weight | 140 | g/m² |
| Thickness | 1.8 | mm |
Cured Mechanical Properties
| Max Service Temp | 180 | °C |
|---|
General Properties
| Gross Weight | 1.164 | kg |
|---|
Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
BR180 Breather Cloth (1520mm)
- AFBR180-152-5PK
- No reviews
BR180 is a 140gsm non-woven polyester felt fabric suitable for use as a breather layer when vacuum bagging prepreg laminates or acting as a breather and soaker layer when vacuum bagging wet-lay laminates.
1.52m (60") wide. Available to buy online in a 5lm folded pack, by the linear metre or in a full 100lm roll.
PRODUCT VERSIONS
Units of Sale
AVAILABILITY:More than 10 availablefor immediate shipping
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
BR180 Breather Layer Cloth is a 140gsm non-woven polyester/polyamide felt fabric suitable for use as a breather layer when vacuum bagging prepreg laminates or as a breather, soaker layer or bleeder cloth when vacuum bagging wet-lay laminates.
BR180 is suitable for curing temperatures up to 180°C/356°F.
Recommended For:
- Prepreg vacuum bagging (autoclave and out-of-autoclave)
- Vacuum bagged wet-lay
Typical Use
Polyester felt such as BR180 is most commonly used to to ensure complete evacuation of air from within a vacuum bag (a breather layer) or to absorb excess resin from a laminate (a soaker layer). Sometimes, as in the case of vacuum bagging a wet-lay laminate, it serves both purposes.
In both of these application, it is essential to separate the breather/soaker layer from the laminate to avoid the material from being wetted out by the resin and becoming an unremovable part of the laminate. This separation is usually provided by a release film, peel ply or both.
Breather cloth is also sometimes applied onto the back of moulds to make them less likely to accidentally puncture a vacuum bag when 'envelope' bagging whole moulds.
How To Buy
This breather fabric is available to buy in a folded 5lm pack, by the linear metre (10lm minimum order) or in wholesale 100lm rolls. Please choose how you would like to purchase from the drop-down list above.
The material itself is 1.52m wide meaning that each linear metre is equal to 1.52sqm.
The 1.52m width of the breather means that (except for the folded pack) it is supplied in a 160cm long box. Please be aware that this 'oversize' package can result in higher transport costs for some international destinations. The 5m pack is folded into a small package which avoids this 'oversize' charge.
Further Information
Using Breather Layer Cloth in Different Processes:
The following lists show a typical layup for pre-preg use and Wet Layup.
Prepreg Laminating
- [ -- Prepreg Laminate -- ]
- Unperforated-Release-Film
- BR180 Breather Layer Cloth
- Vacuum-Bagging-Film
Vacuum Bagged Wet Layup
- [ -- Wet Laminate -- ]
- Peel Ply
- Perforated-Release-Film
- BR180 Breather Layer Cloth
- Vacuum-Bagging-Film
BR180 Breather Layer Cloth is a 140gsm non-woven polyester/polyamide felt fabric suitable for use as a breather layer when vacuum bagging prepreg laminates or as a breather, soaker layer or bleeder cloth when vacuum bagging wet-lay laminates.
BR180 is suitable for curing temperatures up to 180°C/356°F.
Recommended For:
- Prepreg vacuum bagging (autoclave and out-of-autoclave)
- Vacuum bagged wet-lay
Typical Use
Polyester felt such as BR180 is most commonly used to to ensure complete evacuation of air from within a vacuum bag (a breather layer) or to absorb excess resin from a laminate (a soaker layer). Sometimes, as in the case of vacuum bagging a wet-lay laminate, it serves both purposes.
In both of these application, it is essential to separate the breather/soaker layer from the laminate to avoid the material from being wetted out by the resin and becoming an unremovable part of the laminate. This separation is usually provided by a release film, peel ply or both.
Breather cloth is also sometimes applied onto the back of moulds to make them less likely to accidentally puncture a vacuum bag when 'envelope' bagging whole moulds.
How To Buy
This breather fabric is available to buy in a folded 5lm pack, by the linear metre (10lm minimum order) or in wholesale 100lm rolls. Please choose how you would like to purchase from the drop-down list above.
The material itself is 1.52m wide meaning that each linear metre is equal to 1.52sqm.
The 1.52m width of the breather means that (except for the folded pack) it is supplied in a 160cm long box. Please be aware that this 'oversize' package can result in higher transport costs for some international destinations. The 5m pack is folded into a small package which avoids this 'oversize' charge.
Further Information
Using Breather Layer Cloth in Different Processes:
The following lists show a typical layup for pre-preg use and Wet Layup.
Prepreg Laminating
- [ -- Prepreg Laminate -- ]
- Unperforated-Release-Film
- BR180 Breather Layer Cloth
- Vacuum-Bagging-Film
Vacuum Bagged Wet Layup
- [ -- Wet Laminate -- ]
- Peel Ply
- Perforated-Release-Film
- BR180 Breather Layer Cloth
- Vacuum-Bagging-Film
Downloads (1)
| Technical Datasheet (TDS) | 251 KB |
Specification
Product Data
| Colour | White | |
|---|---|---|
| Chemistry / Material | Polyester | |
| Format | Non Woven Fabric | |
| Type | Breather / Soaker |
Weight and Dimensions
| Width | 1520 | mm |
|---|---|---|
| Areal Weight | 140 | g/m² |
| Thickness | 1.8 | mm |
Cured Mechanical Properties
| Max Service Temp | 180 | °C |
|---|
General Properties
| Gross Weight | 1.164 | kg |
|---|
ASK YOUR OWN QUESTION
Customer Product Reviews for BR180 Breather Cloth (1520mm)
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
CUSTOMERS ALSO PURCHASED
CUSTOMERS ALSO PURCHASED
100% SECURE
PAYMENT METHODS
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.