Need any help or advice?+44 (0)1782 454499

CUSTOMER GALLERY

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

MATERIALS & CONSUMABLES
300g +/-45 Biaxial 3k Carbon Fibre Cloth (1270mm) Thumbnail
CF-BI-300-127300g +/-45 Biaxial 3k Carbon Fibre Cloth (1270mm)£26.85 /linear metre

CR1 Easy-Lease Chemical Release Agent 1L Thumbnail
CR1-1CR1 Easy-Lease Chemical Release Agent 1L£25.35 /pack

210g 3x1 Twill 3k Carbon Kevlar Cloth (1200mm) Thumbnail
CK-31-210-120210g 3x1 Twill 3k Carbon Kevlar Cloth (1200mm)£23.00 /linear metre

EasyCell75 Closed Cell PVC Foam T=3mm, 1085 x 1020mm Thumbnail
PVC75-1-3EasyCell75 Closed Cell PVC Foam T=3mm, 1085 x 1020mm£15.65 /sheet

200g 2x2 Twill Black Diolen Cloth (1200mm) Thumbnail
DL-22-200-120200g 2x2 Twill Black Diolen Cloth (1200mm)£8.40 /linear metre

IN2 Epoxy Infusion Resin SLOW 5kg Kit Thumbnail
EP-IN2-S-5IN2 Epoxy Infusion Resin SLOW 5kg Kit£79.75 /kit

Resin Infusion Starter Kit Thumbnail
SK-RIResin Infusion Starter Kit£145.00 /kit

Total £0.00

CUSTOMER GALLERY

Carbon Kevlar bodied Time Attack Race Car

Ilya of RuskiWeldFab wanted to enter TIme Attack so bought a Renault Clio 172 for £400 from eBay to make the basis of the Race Car. He then set about building the fastest Clio 172 in the UK and filming it for his YouTube channel.

Competing in Time Attack in Club Pro 2WD class. 99% of the work was done by himself in the shed. Running the original F4R engine that has been turbocharged, the car now features 430 Bhp and weighs only 980kg.

To achieve this weight and offset the weight of the heavy roll cage and turbocharger, most of the original panels have been replaced with home made Carbon Kevlar panels. These were made by Resin Infusion for weight saving and performance reasons.

The panels made so far include, the roof, bonnet, front and rear bumpers, front and rear wings, splitter, rear diffuser, boot panel, air intake, fuel tank enclosure and flat under floor. Next on the list to produce are Carbon Kevlar doors and rear boot hatch.


ABOUT ILYA AKA RUSKIWELDFAB

ilya aka RuskiWeldFab

RuskiWeldFab is the home of the fastest self-build Renault Clio 172 Race Car. Ilya does the vast majority of the work himself and has a mantra of 'built not bought' in his approach to modifying his race car.

RuskiWeldFab has his own YouTube Channel where he features videos on his fabrication work on this car and other projects as well as other topics.


CONTACT INFORMATION
Facebookwww.facebook.com/Ruskiweldfab

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

MATERIALS & CONSUMABLES
300g +/-45 Biaxial 3k Carbon Fibre Cloth (1270mm) Thumbnail
CF-BI-300-127300g +/-45 Biaxial 3k Carbon Fibre Cloth (1270mm)£26.85 /linear metre

CR1 Easy-Lease Chemical Release Agent 1L Thumbnail
CR1-1CR1 Easy-Lease Chemical Release Agent 1L£25.35 /pack

210g 3x1 Twill 3k Carbon Kevlar Cloth (1200mm) Thumbnail
CK-31-210-120210g 3x1 Twill 3k Carbon Kevlar Cloth (1200mm)£23.00 /linear metre

EasyCell75 Closed Cell PVC Foam T=3mm, 1085 x 1020mm Thumbnail
PVC75-1-3EasyCell75 Closed Cell PVC Foam T=3mm, 1085 x 1020mm£15.65 /sheet

200g 2x2 Twill Black Diolen Cloth (1200mm) Thumbnail
DL-22-200-120200g 2x2 Twill Black Diolen Cloth (1200mm)£8.40 /linear metre

IN2 Epoxy Infusion Resin SLOW 5kg Kit Thumbnail
EP-IN2-S-5IN2 Epoxy Infusion Resin SLOW 5kg Kit£79.75 /kit

Resin Infusion Starter Kit Thumbnail
SK-RIResin Infusion Starter Kit£145.00 /kit

Total £0.00

ABOUT ILYA AKA RUSKIWELDFAB

ilya aka RuskiWeldFab

RuskiWeldFab is the home of the fastest self-build Renault Clio 172 Race Car. Ilya does the vast majority of the work himself and has a mantra of 'built not bought' in his approach to modifying his race car.

RuskiWeldFab has his own YouTube Channel where he features videos on his fabrication work on this car and other projects as well as other topics.


CONTACT INFORMATION
YouTubeRuskiWeldFab
Facebookwww.facebook.com/Ruskiweldfab

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.

YouTubeRuskiWeldFab