Need any help or advice?
+44 (0)1782 454499
Downloads (3)
This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.
 | Safety Datasheet (SDS) |  608 KB |
| Dutch Safety DataSheet | 630 KB |
| Technical Datasheet (TDS) | 167 KB |
Specification
Product Data
| Shelf Life | 12 | Months |
|---|
General Properties
| Gross Weight | 0.63 | kg |
|---|
Shipping Information
Restrictions
In the currently selected pack size, this product is classed as dangerous goods in limited quantity for the purposes of transport.
Shipping is possible to all UK addresses, including the Channel Islands, without restriction. However, due to being classed as 'dangerous goods', delivery times are not guaranteed on any delivery service.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
To check availability of shipping to any other country, add the item to your basket and use the shipping calculator on the basket page.
For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
FUSIONFIX™ GP2 General Purpose Composites Spray Adhesive 500ml
- FF-GP2
Hazardous- 5/5 Average rating
High tack, long open-time, clear, general purpose spray adhesive for the positioning of reinforcement, core materials and bagging consumables in resin infusion and other composites laminating processes.
FUSIONFIX GP2 is 100% compatible with polyester and vinylester resins, and suitable for use with epoxy in most situations (see full description).
Available to buy online in a 500ml spray can.
AVAILABILITY:More than 20 availablefor immediate shipping
Trade discounts
| 0-11 | 12+ |
|---|---|
| £14.50 | £12.00 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
FUSIONFIX™ GP2 is a high-performance spray adhesive designed specifically for temporary positioning of fibre reinforcements, core materials, inserts and vacuum bagging consumables during resin infusion and other composites laminating processes.
Its combination of high tack, which requires only minimal application, and special formulation, allows the adhesive to be used with polyester, vinylester and epoxy resin systems without detectible change to the mechanical properties of the cured laminate.
Although FUSIONFIX™ GP2 is clear, it is not recommended for tacking reinforcement directly to the mould surface in cosmetically critical infusions using epoxy resin, where FUSIONFIX™ EP should be used.
Recommended Uses
FUSIONFIX GP2 is recommended for all tacking and positioning needs including positioning of surface plies, backing plies, core materials and bagging consumables for all resin systems including epoxy, polyester and vinylester, except for tacking the first layer of reinforcement to the mould face of cosmetically critical components using epoxy resin.
| Epoxy | Poly/Vinylester | Epoxy/Prepreg | |
|---|---|---|---|
| Tacking surface-ply to mould face | NO* | YES | YES |
| Positioning core materials | YES | YES | YES |
| Tacking backing plies | YES | YES | YES |
| Positioning bagging consumables | YES | YES | YES |
Advantages
- High tack, from a very light application
- Long working time
- Clear; no milkiness or contamination of cosmetic laminates
Resin Compatibility
Vinylester and Polyester Resin
FUSIONFIX™ GP2 is 100% compatible with polyester and vinylester resins and will dissolve fully into the resin matrix when used with these systems. FUSIONFIX GP2 will leave no residue on the mould or component when used with polyester or vinylester resin systems.
Epoxy Resin
Although GP2 does not dissolve in epoxy resin, it is compatible with epoxy resin and when used appropriately will result in no measurable reduction in mechanical performance or cosmetic contamination such as milkiness or discoloration in the cured laminate. However, because GP2 is not dissolved by epoxy resin, spraying it directly onto the mould surface will leave a tacky residue on both the mould and the component after demoulding. This residue can be easily wiped away with a mild solvent such as IPA but doing so will leave a slight texture on the component surface where the particles of adhesive have been lifted out and may also remove release agent from the mould.
When working with epoxy resin and wanting to tack reinforcement directly to the mould surface, we would recommend using FUSIONFIX™ EP which is epoxy-based and will not leave a tacky residue on the part or mould. FUSIONFIX GP2 can then be used for subsequent plies, core materials and bagging consumables, where its higher tack and longer working time may be preferable over FUSIONFIX EP.
Further Information
For full details on product suitability, compatibility and use, see the accompanying technical datasheet (TDS).
For important safety information, users must download and read the accompanying safety datasheet (SDS) before storage or use.
FUSIONFIX is a trademark of Easy Composites Ltd.
Trade discounts
| 0-11 | 12+ |
|---|---|
| £14.50 | £12.00 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
FUSIONFIX™ GP2 is a high-performance spray adhesive designed specifically for temporary positioning of fibre reinforcements, core materials, inserts and vacuum bagging consumables during resin infusion and other composites laminating processes.
Its combination of high tack, which requires only minimal application, and special formulation, allows the adhesive to be used with polyester, vinylester and epoxy resin systems without detectible change to the mechanical properties of the cured laminate.
Although FUSIONFIX™ GP2 is clear, it is not recommended for tacking reinforcement directly to the mould surface in cosmetically critical infusions using epoxy resin, where FUSIONFIX™ EP should be used.
Recommended Uses
FUSIONFIX GP2 is recommended for all tacking and positioning needs including positioning of surface plies, backing plies, core materials and bagging consumables for all resin systems including epoxy, polyester and vinylester, except for tacking the first layer of reinforcement to the mould face of cosmetically critical components using epoxy resin.
| Epoxy | Poly/Vinylester | Epoxy/Prepreg | |
|---|---|---|---|
| Tacking surface-ply to mould face | NO* | YES | YES |
| Positioning core materials | YES | YES | YES |
| Tacking backing plies | YES | YES | YES |
| Positioning bagging consumables | YES | YES | YES |
Advantages
- High tack, from a very light application
- Long working time
- Clear; no milkiness or contamination of cosmetic laminates
Resin Compatibility
Vinylester and Polyester Resin
FUSIONFIX™ GP2 is 100% compatible with polyester and vinylester resins and will dissolve fully into the resin matrix when used with these systems. FUSIONFIX GP2 will leave no residue on the mould or component when used with polyester or vinylester resin systems.
Epoxy Resin
Although GP2 does not dissolve in epoxy resin, it is compatible with epoxy resin and when used appropriately will result in no measurable reduction in mechanical performance or cosmetic contamination such as milkiness or discoloration in the cured laminate. However, because GP2 is not dissolved by epoxy resin, spraying it directly onto the mould surface will leave a tacky residue on both the mould and the component after demoulding. This residue can be easily wiped away with a mild solvent such as IPA but doing so will leave a slight texture on the component surface where the particles of adhesive have been lifted out and may also remove release agent from the mould.
When working with epoxy resin and wanting to tack reinforcement directly to the mould surface, we would recommend using FUSIONFIX™ EP which is epoxy-based and will not leave a tacky residue on the part or mould. FUSIONFIX GP2 can then be used for subsequent plies, core materials and bagging consumables, where its higher tack and longer working time may be preferable over FUSIONFIX EP.
Further Information
For full details on product suitability, compatibility and use, see the accompanying technical datasheet (TDS).
For important safety information, users must download and read the accompanying safety datasheet (SDS) before storage or use.
FUSIONFIX is a trademark of Easy Composites Ltd.
Specification
Product Data
| Shelf Life | 12 | Months |
|---|
General Properties
| Gross Weight | 0.63 | kg |
|---|
ASK YOUR OWN QUESTION
Customer Product Reviews for FUSIONFIX™ GP2 General Purpose Composites Spray Adhesive 500ml
High quality composites spray adhesive at a very good price.
Brilliant all round spray adhesive. Tack level is VERY high though, it's almost impossible to apply too little but you get used to it and only use a tiny amount. Long open time is also really useful. I use this is cosmetic carbon work and never see any milkiness (which I did with the original Fusion Fix). Bravo.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Shipping Information
Restrictions
In the currently selected pack size, this product is classed as dangerous goods in limited quantity for the purposes of transport.
Shipping is possible to all UK addresses, including the Channel Islands, without restriction. However, due to being classed as 'dangerous goods', delivery times are not guaranteed on any delivery service.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
To check availability of shipping to any other country, add the item to your basket and use the shipping calculator on the basket page.
For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
100% SECURE
PAYMENT METHODS
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.