Need any help or advice?+44 (0)1782 454499
Uni-Mould Introduction And Application Guide |
Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.
The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.
Uni-Mould is a special vinylester composite tooling system which can be used to make high quality, cost-effective composite (fibreglass) moulds, suitable for direct contact with epoxy resin, in rapid time. Uni-Mould moulds are particularly suitable for production of larger carbon fibre parts using resin infusion with epoxy resin.
This detailed user guide explains the principle of the system, the processes that resulting moulds are suitable for, compatible pattern and part finishes and a step by step guide to using the system, including tips and techniques for avoiding common problems when new to composite mould making or the Uni-Mould system.
The Uni-Mould Complete Mould Making Starter Kit is the ideal way to purchase the materials in handy, matched quantities. All the materials in the kits are available separately for custom sized and very large projects.
Please share any questions or comments you may have about this video tutorial.
Uni-Mould Introduction And Application Guide |
Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.
The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.
Please share any questions or comments you may have about this video tutorial.
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.