Need any help or advice?
+44 (0)1782 454499
Specification
General Properties
| Gross Weight | 0.018 | kg |
|---|
Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Perma-Grit 32mm Disc with Arbor
- RD2
- No reviews
Larger sized 32mm Perma-Grit® rotary cutting disc with arbor. Use in a Dremel or similar rotary tool to quickly and accurately trim carbon/glass fibre laminates without splintering or chipping.
This professional quality tungsten carbide grit cutting disc will last a lifetime and make light work of carbon fibre and fibreglass laminates.
AVAILABILITY:More than 20 availablefor immediate shipping
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Tough mild steel Perma-Grit cutting disc has tungsten carbide welded to the edges. The discs will cut carbon fibre, fibreglass and all other composites with easy and will not 'frey' or shatter the edges of your precious material. In addition, these discs will not break or lose their edge, providing years of faithful service!
The cutting disc is supplied with a 3mm arbor, locking washer and M3 nut.
Typical Uses
These Perma-Grit cutting wheels are perfect for trimming carbon fibre sheet, slot cutting (like for switch mounting in a carbon dash) and cutting through tough composites (like carbon/steel sandwich panels).
As with all Perma-Grit tools they are also able to cut stainless steel, spring steel, fibreglass, tile brick and more.
Further Information
How to Use
Use the Perma-Grit cutting disc with a variety of power tools sich as Minicraft, Dremel, Flexi-drives and similar small drills. Run at slow to medium speeds and wear eye protection at all times.
Trim lines can be then be rubbed smooth with a Perma-Grit sanding block or file (working from coarse to fine grit) and then finished with rubbing compound and wax.
Note: Regular use of electric drills (like those listed above) with carbon fibre will cause carbon dust to accumulate on your drill motor's electrical contacts and will eventually damage your drill. If possible, blow off your electrical tools after use with an air compressor and work in a well ventilated area to preserve the life of your electrical tools when working with carbon fibre.
Tough mild steel Perma-Grit cutting disc has tungsten carbide welded to the edges. The discs will cut carbon fibre, fibreglass and all other composites with easy and will not 'frey' or shatter the edges of your precious material. In addition, these discs will not break or lose their edge, providing years of faithful service!
The cutting disc is supplied with a 3mm arbor, locking washer and M3 nut.
Typical Uses
These Perma-Grit cutting wheels are perfect for trimming carbon fibre sheet, slot cutting (like for switch mounting in a carbon dash) and cutting through tough composites (like carbon/steel sandwich panels).
As with all Perma-Grit tools they are also able to cut stainless steel, spring steel, fibreglass, tile brick and more.
Further Information
How to Use
Use the Perma-Grit cutting disc with a variety of power tools sich as Minicraft, Dremel, Flexi-drives and similar small drills. Run at slow to medium speeds and wear eye protection at all times.
Trim lines can be then be rubbed smooth with a Perma-Grit sanding block or file (working from coarse to fine grit) and then finished with rubbing compound and wax.
Note: Regular use of electric drills (like those listed above) with carbon fibre will cause carbon dust to accumulate on your drill motor's electrical contacts and will eventually damage your drill. If possible, blow off your electrical tools after use with an air compressor and work in a well ventilated area to preserve the life of your electrical tools when working with carbon fibre.
Specification
General Properties
| Gross Weight | 0.018 | kg |
|---|
The shaft is 3.1mm diameter and hence will fit no problems.
Although the Perma-Grit Rotary cutting discs will cut a cured epoxy kevlar laminate, you will get some fluffing of the kevlar fabric on the edge meaning you will need to regularly clean the cutting tool to prevent clogging. Once you have finished trimming, any remaining Kevlar fluff can be sliced off using a brand new Stanley knife blade or scalpel.
ASK YOUR OWN QUESTION
Customer Product Reviews for Perma-Grit 32mm Disc with Arbor
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
CUSTOMERS ALSO PURCHASED
CUSTOMERS ALSO PURCHASED
100% SECURE
PAYMENT METHODS
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.