Need any help or advice?
+44 (0)1782 454499
Downloads (1)
 | Technical DataSheet (TDS) |  469 KB |
Specification
Product Data
| Colour | Yellow | |
|---|---|---|
| Format | Woven Fabric | |
| Fibre Type | Aramid / Kevlar Fibre | |
| UV Resistance | Poor | |
| Brand | Dupont |
Weight and Dimensions
| Width | 1000 | mm |
|---|---|---|
| Areal Weight | 300 | g/m² |
| Consolidated Thickness | 0.4 | mm |
| Thickness | 0.47 | mm |
Fabric Specification
| Weave | 2 x 2 Twill | |
|---|---|---|
| Fibre Specifics | Kevlar 49 |
Compatible With
| Compatible With | Epoxy | Yes |
|---|---|---|
| Compatible With | Vinylester | Yes |
| Compatible With | Polyester | No |
Mechanical Properties
| Ends | 4.75 | cm |
|---|---|---|
| Picks | 4.75 | cm |
General Properties
| Gross Weight | 0.3 | kg |
|---|
Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
When packaged, this product is over 1m in length. A small additional handling charge will apply when shipping to some countries and regions. When applicable, this handling charge will be included in the automatic shipping calculation shown on the basket page.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
300g 2x2 Twill Weave Kevlar Cloth (1000mm)
- K-22-300-100
- No reviews
High quality 300gsm woven Kevlar® fabric reinforcement using genuine Dupont® Kevlar® yarn in a 2x2 twill weave for good drapabily.
This high performance aramid cloth can be used on its own to make panels with maximum impact strength or used in combination to add impact strength to carbon or glass fibre laminates in applications such as motorsport panels, canoes, kayaks etc.
This fabric is 1m (1000mm) wide and sold by the linear metre.
AVAILABILITY:More than 100 availablefor immediate shipping
Trade discounts
| 0-4 | 5-9 | 10-49 | 50+ |
|---|---|---|---|
| £22.00 | £20.50 | £19.50 | £18.50 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
This Kevlar® brand heavyweight 300g kevlar cloth 2/2 twill weave can be used on its own or in conjunction with other reinforcement fabrics (such as carbon fibre) to achieve a very strong and impact resilient composite.
Kevlar® provides very high resistance to impact and abrasion and is much more resilient to fracture separation than other reinforcements (including carbon fibre).
Twill Kevlar® cloth can be laminated in just the same way as carbon fibre. It is suitable for use in wet-lay, vacuum bagging or resin infusion.
For maximum performance Kevlar® should always be laminated with Epoxy resin.
Where a thinner fabric is required, we also stock a Aramid Cloth Fabric Satin Weave 175g.
DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
How to Buy
This roll is 1m (39") wide and the fabric is sold by the linear metre. The unit price shown is for 1 linear metre, volume discounts automatically apply for larger quantities of fabric.
Please purchase the number of linear metres you require. When purchasing multiple metres the fabric will be supplied in one continuous length on a roll.
Trade discounts
| 0-4 | 5-9 | 10-49 | 50+ |
|---|---|---|---|
| £22.00 | £20.50 | £19.50 | £18.50 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
This Kevlar® brand heavyweight 300g kevlar cloth 2/2 twill weave can be used on its own or in conjunction with other reinforcement fabrics (such as carbon fibre) to achieve a very strong and impact resilient composite.
Kevlar® provides very high resistance to impact and abrasion and is much more resilient to fracture separation than other reinforcements (including carbon fibre).
Twill Kevlar® cloth can be laminated in just the same way as carbon fibre. It is suitable for use in wet-lay, vacuum bagging or resin infusion.
For maximum performance Kevlar® should always be laminated with Epoxy resin.
Where a thinner fabric is required, we also stock a Aramid Cloth Fabric Satin Weave 175g.
DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
How to Buy
This roll is 1m (39") wide and the fabric is sold by the linear metre. The unit price shown is for 1 linear metre, volume discounts automatically apply for larger quantities of fabric.
Please purchase the number of linear metres you require. When purchasing multiple metres the fabric will be supplied in one continuous length on a roll.
Downloads (1)
| Technical DataSheet (TDS) | 469 KB |
Specification
Product Data
| Colour | Yellow | |
|---|---|---|
| Format | Woven Fabric | |
| Fibre Type | Aramid / Kevlar Fibre | |
| UV Resistance | Poor | |
| Brand | Dupont |
Weight and Dimensions
| Width | 1000 | mm |
|---|---|---|
| Areal Weight | 300 | g/m² |
| Consolidated Thickness | 0.4 | mm |
| Thickness | 0.47 | mm |
Fabric Specification
| Weave | 2 x 2 Twill | |
|---|---|---|
| Fibre Specifics | Kevlar 49 |
Compatible With
| Compatible With | Epoxy | Yes |
|---|---|---|
| Compatible With | Vinylester | Yes |
| Compatible With | Polyester | No |
Mechanical Properties
| Ends | 4.75 | cm |
|---|---|---|
| Picks | 4.75 | cm |
General Properties
| Gross Weight | 0.3 | kg |
|---|
For wet-lay lamination you will use a bit more resin than the weight of the fabric. A typical fibre resin ratio for Aramid based fabrics is 45/55. For example, with a 300gsm cloth, for 1 square metre you will have 300g of fabric and thus will need 367g of resin to wet it out, plus a small amount of wastage for the brush and mixing pot.
You can purchase a sample of our fabrics here.
No. Our Kevlar Fabric is only available in the classic Kevlar yellow.
We do not currently stock any hybrid pre-pregs either as carbon-aramid mix or pure aramid
Aramid and Diolen laminates can be drilled into using a HSS drill bit designed for drilling steel. Start with a pilot hole and work up the diameter until the desired hole size is achieved. Any aramid/diolen fluff can be cut off with a sharp Stanley blade or scalpel.
In it's fabric form as sold, it's like a woven cloth, soft and flexible so yes it can be quite easily folded back on itself. Once laminated with a resin, the material would cure stiff as the resin solidifies.
No, this Kevlar® fabric is only available in its natural yellow finish.
ASK YOUR OWN QUESTION
Customer Product Reviews for 300g 2x2 Twill Weave Kevlar Cloth (1000mm)
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
When packaged, this product is over 1m in length. A small additional handling charge will apply when shipping to some countries and regions. When applicable, this handling charge will be included in the automatic shipping calculation shown on the basket page.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
CUSTOMERS ALSO PURCHASED
CUSTOMERS ALSO PURCHASED
100% SECURE
PAYMENT METHODS
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.