Need any help or advice?+44 (0)1782 454499

Vacuum Accessories & Hose

Our range of vacuum equipment, accessories and hose used in a range of composites vacuum processes including vacuum bagging, resin infusion, vacuum bonding/pressing and degassing.

For smaller vacuum fittings and connectors please see our vacuum fittings category.

Our range of vacuum equipment, accessories and hose used in a range of composites vacuum

PRODUCTS (34)

Showing 1-32 of 34
MTI® Hose - Microporous Vacuum Line Thumbnail
MTI® Hose - Microporous Vacuum Line

From £3.05 /M

Semi permeable hose for resin infusion allows air through but not resin
Compare
DD-Compound
MVL Economy Microporous Vacuum Line Thumbnail
MVL Economy Microporous Vacuum Line

From £2.05 /M

Lower cost semi permeable vacuum hose for resin infusion
Compare
SQUEEZEE Professional Infusion Line Clamp 15mm Thumbnail
SQUEEZEE Professional Infusion Line Clamp 15mm

From £18.50

High performance line clamp for daily users
Compare
Vac Checker® Precision Digital Vacuum Gauge Thumbnail
Vac Checker® Precision Digital Vacuum Gauge

£190.75

High precision digital vacuum gauge for fast identification of small leaks
Compare
Vac Checker Hose-Tail Adapter Set Thumbnail
Vac Checker Hose-Tail Adapter Set

£9.95

Set of 3 hose tail adapters for Vac Checker digital vacuum gauge
Compare
MTI® Valve - Resin Inlet Regulator Thumbnail
MTI® Valve - Resin Inlet Regulator

From £2.15

Used to partially restrict resin flow into an infusion
Compare
DD-Compound
TBC2 Through-Bag Connector Thumbnail
TBC2 Through-Bag Connector

From £11.50

Professional quality through-bag connector (breach unit) for vacuum bagging/autoclave use.
Compare
VR20 Vacuum Regulator Thumbnail
VR20 Vacuum Regulator

£40.00

Precise control and near-lossless design make this regulator the ideal way to supply a controlled level of vacuum.
Compare
NEW VERSION
Basic Vacuum Gauge, 40mm, Rear Entry, 1/8" BSP Thumbnail
Basic Vacuum Gauge, 40mm, Rear Entry, 1/8" BSP

£4.50 (usually £7.50)

Cost-effective rear entry 1/8" BSP 40mm vacuum gauge suitable for vacuum pumps and equipment.
Compare
TO CLEAR
SQUEEZER Professional Infusion Line Clamp 25mm Thumbnail
SQUEEZER Professional Infusion Line Clamp 25mm

From £35.70

High performance line clamp for daily users
Compare
Resin Infusion Connector 8mm Thumbnail
Resin Infusion Connector 8mm

From £1.65

Resin infusion connector suitable for resin line connection.
Compare
Resin Infusion Connector 10mm Thumbnail
Resin Infusion Connector 10mm

From £1.80

Resin infusion connector suitable for resin line connection.
Compare
Resin Infusion Vacuum Port 8mm Thumbnail
Resin Infusion Vacuum Port 8mm

From £1.30

Resin infusion Vacuum Port suitable for vacuum line connection.
Compare
Resin Infusion Vacuum Port 10mm Thumbnail
Resin Infusion Vacuum Port 10mm

From £1.55

Resin infusion Vacuum Port suitable for vacuum line connection.
Compare
Large Resin Infusion Spiral 8mm ID Thumbnail
Large Resin Infusion Spiral 8mm ID

From £0.80

Disposable polyethylene spiral for distributing resin in vacuum resin infusion, 8 ID, Linear meters.
Compare
Extra Large Resin Infusion Spiral 10mm ID Thumbnail
Extra Large Resin Infusion Spiral 10mm ID

From £0.85

Disposable polyethylene spiral for distributing resin in vacuum resin infusion, 10 ID, Linear meters.
Compare
8mm ID Polyethylene Vacuum Hose Thumbnail
8mm ID Polyethylene Vacuum Hose

From £0.70

Low cost, disposable 8mm ID vacuum hose/resin line recommended for resin infusion < 50°C
Compare
10mm ID Polyethylene Vacuum Hose Thumbnail
10mm ID Polyethylene Vacuum Hose

From £0.75

Low cost, disposable 10mm ID vacuum hose/resin line recommended for resin infusion < 50°C
Compare
Resin Infusion Spiral Standard Flow 10m Coil Thumbnail
Resin Infusion Spiral Standard Flow 10m Coil

From £2.00

Disposable polyethylene spiral for distributing resin in vacuum resin infusion, 4.5mm OD, 10m pack.
Compare
Lid Assembly for Professional Catch-Pot Thumbnail
Lid Assembly for Professional Catch-Pot

£24.00

Replacement lid assembly for our CP1 resin infusion catch-pot
Compare
CP1 Resin Infusion Catch-Pot 1.2L Thumbnail
CP1 Resin Infusion Catch-Pot 1.2L

£79.95

Professional quality resin trap/catch-pot sits between the vacuum pump and the bag/infusion to prevent accidental pump damage.
Compare
VF1 Vacuum Pump Inlet Filter Thumbnail
VF1 Vacuum Pump Inlet Filter

£27.95

Protect your vacuum pump from damage caused by ingesting stray fibres and dust with this highly effective inlet filter.
Compare
VF1 Vacuum Filter Internal Filter Thumbnail
VF1 Vacuum Filter Internal Filter

From £2.50

Replacement internal filter for our VF1 vacuum pump inlet filter.
Compare
Glycerine-Filled Vacuum Gauge, 50mm, 1/4" BSP Thumbnail
Glycerine-Filled Vacuum Gauge, 50mm, 1/4" BSP

From £9.50

High quality, glycerine filled 50mm 1/4" BSP vacuum gauges in bottom entry and rear entry variants

Version Options

Compare
VC200 Quick-Release Vacuum Coupling Set Thumbnail
VC200 Quick-Release Vacuum Coupling Set

From £9.95

Quick connect/disconnect (self-sealing) push-fit vacuum coupling suitable for high-temperature & autoclave use.
Compare
Vacuum Leak Flow Indicator Thumbnail
Vacuum Leak Flow Indicator

£9.50

Simple but effective! Will indicate all but the tiniest leak in a vacuum bag, speeding up bagging and alerting to new leaks.
Compare
8mm ID Silicone Vacuum Hose Thumbnail
8mm ID Silicone Vacuum Hose

From £4.00

High quality 8mm ID silicone vacuum hose suitable for ambient or high temperature use up to 240°C
Compare
Resin Infusion Silicone Connector Thumbnail
Resin Infusion Silicone Connector

From £2.00

Reusable silicone resin infusion connector suitable for resin or vacuum line connection.
Compare
Resin Infusion Line Clamp Thumbnail
Resin Infusion Line Clamp

£5.25

Reusable metal hose clamp used extensively for clamping resin and vacuum hoses during resin infusion.
Compare
6mm ID Budget PVC Vacuum Hose Thumbnail
6mm ID Budget PVC Vacuum Hose

From £0.50 /M

Low cost, disposable 6mm ID vacuum hose/resin line recommended for resin infusion > 50°C

Roll Length Options

Compare
1/2" I.D. Wire Reinforced Vacuum Hose Thumbnail
1/2" I.D. Wire Reinforced Vacuum Hose

From £3.00

1/2" (12mm) internal diameter wire reinforced PVC vacuum hose recommended for higher capacity vacuum pumps and equipment.
Compare
Silicone Seal for Catch-Pot Thumbnail
Silicone Seal for Catch-Pot

£7.50

Replacement silicone seal for our CP1 resin infusion catch-pot.
Compare

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.